jc_james03 0 Posted May 23, 2016 Can anyone help me in my DVR after an upgrade it will not load to its GUI and it start to beep too long and will not stop. DVR HIKVISION Model DS-7208HWI-E2 Share this post Link to post Share on other sites
ben10 0 Posted May 23, 2016 Can anyone help me in my DVR after an upgrade it will not load to its GUI and it start to beep too long and will not stop. DVR HIKVISION Model DS-7208HWI-E2 this one need rs232 module to upgrade and using hyperterminal pls check if ur dvr have rs232 port Share this post Link to post Share on other sites
Securame 0 Posted May 23, 2016 If you messed up with the firmware and installed a wrong one, you can restore the correct one using TFTP. Share this post Link to post Share on other sites
jc_james03 0 Posted May 24, 2016 If you messed up with the firmware and installed a wrong one, you can restore the correct one using TFTP. Could you teach me how to correct it? Share this post Link to post Share on other sites
jc_james03 0 Posted May 24, 2016 @ben10 my dvr has a rs232 Share this post Link to post Share on other sites
ben10 0 Posted May 29, 2016 @ben10 my dvr has a rs232 If ur dvr have RS232 I can help u but ready u pc that have com port and prepare cable 9pin DV9 u need to plug to ur pc and to dvr rs232 port if all ready just PM me Share this post Link to post Share on other sites
mrydni 0 Posted June 17, 2016 hi, i have the same problem. After upgrade the DVR will not load, just freeze on logo-screen. the DVR is chineese unknown, on sticker write "Model: AHD-6008NH-V2", on motherboard write "08NH". i found this firmware for "08NH" http://www.flktech.net/en/download.asp?tid=3 but i can't reflash the DVR. DVR freeze on logo-screen, but have ping-response, and have only 2 ports open: 9527 and 9530, but i can't connect via telnet.... Can someone help me? How I can reflash the DVR? Share this post Link to post Share on other sites
jc_james03 0 Posted August 3, 2016 hi,i have the same problem. After upgrade the DVR will not load, just freeze on logo-screen. the DVR is chineese unknown, on sticker write "Model: AHD-6008NH-V2", on motherboard write "08NH". i found this firmware for "08NH" http://www.flktech.net/en/download.asp?tid=3 but i can't reflash the DVR. DVR freeze on logo-screen, but have ping-response, and have only 2 ports open: 9527 and 9530, but i can't connect via telnet.... Can someone help me? How I can reflash the DVR? You can download a TFTP tool to flash the right firmware. Share this post Link to post Share on other sites
