hrishi_mc 0 Posted May 25, 2016 Hi All, We have 2 NVR's in our control room and plan to view the cameras connected to these at the security gates. We will be having HDMI enabled monitors at the security gates, which is around 500ft away from the control room. What is the best way to view this NVR data on the screens. We dont intend to have computers/desktops at the gates. There are OFC cables between security gates and control rooms and there is a switch also in place at the gates. Also multiple gates will be viewing the same camera feeds connected to the same NVR. Thanks in Advance, Regards, Hrishi Share this post Link to post Share on other sites
hrishi_mc 0 Posted May 26, 2016 Does having a low cost PC(with necessary HDMI output) be helpful, which can be used to perform other gate-keeping activities. We are looking for solutions, where we need not draw a new cable specifically for viewing. Thanks, Hrishi Share this post Link to post Share on other sites
tomcctv 190 Posted May 26, 2016 Do you have internet at the location lan or wan And do you want to display or control as well Share this post Link to post Share on other sites
hrishi_mc 0 Posted May 26, 2016 There is a LAN setup and only DISPLAY would be required at the gates and no access to NVR. But the cost of OFC to HDMI converter is coming higher than a basic PC Thanks Share this post Link to post Share on other sites
tomcctv 190 Posted May 26, 2016 I would look at a IP decoder box to hdmi You will have control of the cameras so will also do I screen layout format of your choice Share this post Link to post Share on other sites