funkadelic 0 Posted May 27, 2016 i have a Swann NVR8-7200 NVR that i purchased from costco a few years back and from what I understand, it is a rebranded Hikvision DS-7608NI-E2/8P. Should I be able to upgrade the firmware using the DS-7608NI-E2/8P firmware? I downloaded the latest firmware from here (the "DS-76xxNI-E1(E2)P/DS-76xxNI-E1(E2)P_USA_Firmware_V3.3.6_151229" one) and tried to update in iVMS-4200 but it results in an "Upgrading failed" message. For reference, this is what my swann reports in iVMS-4200 (iVMS-4200 version 2.5.0.3 build20160330 ): thanks in advance for any advice, -norm Share this post Link to post Share on other sites
Daryl733 0 Posted May 27, 2016 Standard firmware might not work on rebanded equipment. The inside might not be the standard hardware mix. Share this post Link to post Share on other sites
khx73 0 Posted June 9, 2016 funkadelic, I have the identical unit, firmware and all as you... have you added a second drive to it? I have, and since have had recorded video freeze after the first 5 seconds.. Share this post Link to post Share on other sites
funkadelic 0 Posted June 10, 2016 funkadelic, I have the identical unit, firmware and all as you... have you added a second drive to it? I have, and since have had recorded video freeze after the first 5 seconds.. i haven't added an additional drive Share this post Link to post Share on other sites
MeganJohnson 0 Posted February 4, 2018 Funkadelic, Did you ever get things to work with your Swann NVR? I have the Swann NVR8-7200 that came with four Swann HD-820cams (1080p). I recently bought a couple Hikvision DS-2CD2032 1080p cameras to add to my system. I am not a 'technical' person at all and don't have the money to buy/install an entire new system. I'm trying to get my Hikvision cameras to work with my Swann NVR. Thus far, googling led me to this forum. I attached what I'm looking at with iVMS-4200 and the camera configuration from my Swann NVR. I've tried setting the Hikvision cameras to ONVIF, but they remain 'disconnected.' I read something about installing Hikvision firmware onto the Swann NVR8-7200 to make the NVR work with the Swann cameras and the Hikvision cameras, but I am afraid I'll do something wrong and 'brick' the system. Can anybody give me step by step instructions on what I need to do with working links? Thanks in advance to anybody that can help me!! Share this post Link to post Share on other sites