ahboy783 0 Posted May 28, 2016 Hey folks, new here, and new to CCTVs in general. I have a specific setup where I would need to have 3 spot monitors set up in the rear of a retail store. I am looking for something like the Lorex LEV2724B , dome or bullet style does not matter. https://www.lorextechnology.com/downloads/security-cameras/LBV2723B/LBV2723_SERIES_TRIFOLDQSG_EN_R2.pdf If you follow the link above to the "quick setup guide" you will see a diagram of the "camera wiring" which shows the camera itself has TWO output wires (page 2), one green color coded bnc to run back to the DVR, the second yellow bnc can be converted to and RCA to be plugged into and TV. To sum it up I'm looking for a analog camera that is BNC with 1080p, that has this same output capabilities of the above unit, unless someone else knows of a better camera or method to achieve individual spot monitors. Side note I've already had to cancel an order from Lorex which consisted of this model "LBV2711B" I was told by tech support that, this camera has signal that cannot be displayed directly out of the camera into ANY monitor. Hence removing the idea I could use a T, Y or amplified splutter to get multiple outputs from the camera itself. THANK YOU ALL FOR YOUR TIME AND HELP. Share this post Link to post Share on other sites