febulous15 0 Posted May 18, 2006 I'm trying to run two units of 16 ch Kodicom Diginet in one network. So, this means that i have to change the default data and video ports, right? Thus, I have changed 8080 >>> 9090, 8081 >>> 9091 However, after I logged in using Internet Explorer, it will pop up and error msg saying "WebDVR - Connection failed" Have anyone succesfully ran 2 units of Kodicom Diginet PC-DVRs in one network? Mind to share? Share this post Link to post Share on other sites
Gotta Stop 0 Posted May 18, 2006 The ports you changed were for the center program. For the web based server you need to change the port settings in Apache. Share this post Link to post Share on other sites
Gotta Stop 0 Posted May 18, 2006 The ports you changed were for the center program. For the web based server you need to change the port settings in Apache. Share this post Link to post Share on other sites
febulous15 0 Posted May 18, 2006 I managed to change the port 80 >> 81 in the httpd and httpd.default files found in the conf folder of Apache. So do u have any idea where to change the ports for 8080 and etc in Apache? Share this post Link to post Share on other sites
themerchant1 0 Posted May 19, 2006 Apache doesn't use port 8080 - 8090. It sounds like now you will need to do some port forwarding to separate the two DVRs in the router. You will also have a hard time running the center software on the same ip#/router. it may be easy and better to get another IP # (public) for the second DVR. Share this post Link to post Share on other sites
Wachhund 0 Posted May 19, 2006 Once you configure the network settings to be different for both machines, port forward your router for each separately. Change one machine to use ports 9001-9010 and the other 8081 - 8090. Also, the web dvr needs an Axtive X download to work properly. If you use the center program on your network, it will work just fine. Share this post Link to post Share on other sites
crirvine 0 Posted May 19, 2006 Are you trying to look at them from inside the network or outside the network from the internet. No reason to change ports if you are inside the network just network IP address so the do not have the same address. Share this post Link to post Share on other sites
febulous15 0 Posted May 20, 2006 thanks for your help guys....however, the problem is eventhough i use localhost to test, the problem is there! if i dont change the default ports, localhost test is alright! Share this post Link to post Share on other sites
T_Qooze 0 Posted June 22, 2006 Am I too late? I hope not. Since I also have 2 different CCTV on my network, I have tried to find the sollution. Well, I have managed to solve an internal viewing problem but never tried it from outside yet. Ok. Here's how I did it... Port forward the primary DVR as normal. Portforward the secondary but in slight changes... (portstart/end as what configured in dvr but the portmap I changed into others as below.) 80 - 85 (since most router uses 81 as their remote admin port) 8080 - 8180 8081 - 8181 8083 - 8183 8084 - 8184 8085 - 8185 8090 - 8190 3001 - 3111 3005 - 3115 6911 - 6091 Then I disable all firewall including the router's. (well I would prefer to put the software into an exclusion list so that the firewall will still working but it would be done later. Main thing is to get it working right...) Try this. Hope it work for you. Share this post Link to post Share on other sites
boy88127 0 Posted December 23, 2006 I can change port 8080 - 8180 8081 - 8181 8083 - 8183 8084 - 8184 8085 - 8185 8090 - 8190 3001 - 3111 3005 - 3115 6911 - 6091 but please tell How to config secondary port 80 to port 82 thank you Share this post Link to post Share on other sites
