bilgsmf 0 Posted June 9, 2016 have installed a Avigilon NVR and have 5 speakers to install. Will be installing Valcom V1036M speakers. looking for recommendations for a 24VDC power supply to power these speakers. Whats a good reliable Power sply and hopefully affordable. Share this post Link to post Share on other sites
bilgsmf 0 Posted June 9, 2016 the cameras are H4 bullet Cams. Share this post Link to post Share on other sites
jeromephone 6 Posted June 13, 2016 I would get the power supply from valcom they are pricey but the ones we used had two outputs so you could run a couple of paging horns from each power supply. I don't know about Valcom's warranty if you use a different brand power supply. Are you adding these to an existing system? I would look at the manuals carefully as these have a signal path and a power pair of wires and you do not want to mix them up. Share this post Link to post Share on other sites
thewireguys 3 Posted June 14, 2016 Here you go: http://www.meanwellusa.com/ Share this post Link to post Share on other sites