wykenwizard 0 Posted June 9, 2016 I have had 4 cameras running on my Annke 4 channel system for quite sometime. However, today I changed one of the cameras (No3) for another. It isn't the same brand as the one I replaced, but it looks the same, just a different manufacturers label. When I checked the monitor I had lost my camera 4 although the newly installed camera 3 was working fine. I unplugged cameras 3 and 4 and then plugged camera 4 into the camera 3 input. Camera 4 worked again. Plugging camera 3 into the camera 4 input also works fine as long as there is no camera plugged into the camera 3 input at the same time. I have checked the BPS and cameras 1 to 3 are all showing 4 digits for kp/s Camera 4 is only showing 2 digits. Can anyone explain what the problem might be and how I might be able to fix it? I have tried shortening the cable to camera 4 and have even tried swapping camera 4, but there is still a problem. I would be grateful for any ideas re this? Share this post Link to post Share on other sites
