Got remote access to NVR but no video stream ?

[coralreef 0]

Hi all

 

Im sure its just me being a noob at routing but here goes.

 

I port forwarded my NVR, TCP 85 and UDP 5050, and i have remote access through my_ip:85 - but no video stream ???

 

What am i missing to port through ?

[Securame 0]

Probably the RTSP port; check the ports that your NVRs uses (you do not even say what NVR you have, so it is hard to guess).

[coralreef 0]

Thought the same put where do i add that in the router, it only states tcp/udp ?

 

Router is a linksys and NVR i standard 8ch cheapo from eBay

[Securame 0]

No way to know then what ports it uses, check the network config section on the NVR. There's probably more than just two ports.

[coralreef 0]

Here are NVR settings/ports.

 

As mentioned i have forwarded HTTP port 85 and UDP 5050.

 

[Securame 0]

Make 5050 TCP+UDP. You also need to forward 554, that is for video streaming, and to make sure I would also forward 1935.

 

When in doubt, make them always TCP+UDP.

[coralreef 0]

Make 5050 TCP+UDP. You also need to forward 554, that is for video streaming, and to make sure I would also forward 1935.

 

When in doubt, make them always TCP+UDP.

 

Thanks will try that later today and get back to you.

[coralreef 0]

It worked thanks !

 

Any tips on a good iPhone app for this mini NVR unit, as i have no video stream here due to active x...

Best working browser on the NVR is IE but thats not durabel on an iPhone