IP cams powered over Ethernet..any solutions???

[kostasgali 0]

I would like to attach four analog cameras with four new digital cameras, that i'll buy, all eight in one observation monitor.Also I'd like to be remotely controled by laptop or PDA or cell phone.So I guess it must be power over Ethernet and IP capable.Any solutions??especially on the way I can switch the old analog camera signal into digital..

[McJannet 0]

I was just looking at some Panasonic equipment that does exactly this.

 

Start with WVNP240 network camera:

 

-Built-in MPEG-4 and JPEG digital signal output at VGA image size with

up to 30 fps.

-Power over Ethernet (PoE) IEEE 802.3af.

-Progressive scan type CCD image sensor.

-Internet Protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS,

DDNS, NTP and SNMP.

-Built-in network interface (10Base-T / 100Base-TX) for remote monitoring by PC.

-Sensitivity of 1.1 lux (0.11 fc) at F1.2 optional lens.

-Built-in SD Memory card slot for FTP backup.

-Built-in electronic zoom function (1x, 1.5x, 2x, 2.5x and 3x).

 

Then for existing analog cameras, use Indigo Vision encoder such as 95009-6000

 

Then, perhaps some Indigo Vision VideoBridge software.

 

Just had the rep over today, demo worked very well.

 

Regards:

 

 

Dave