odbob 0 Posted August 22, 2016 I have a KKmoon DVR, I cannot get my Dedicated Micros PTZ camera to operate, the protocol for this camera is not listed in the DVR's options, is there anything that I can do to remedy this, thanks in anticipation of a reply Share this post Link to post Share on other sites
sms88 0 Posted August 28, 2016 Not familiar with your Dvr however if the DVRs provide telemetry controls via RS485 or coax, you will simply have to change the address switches on the head of the dome, this can be achieved by removing the hemisphere cover and located on the top board inside the dome are 2 address switches a yellow and blue one Share this post Link to post Share on other sites
rossko 0 Posted August 28, 2016 Some Dedicated Micros PTZ camera models allow you to select different protocols. You should be able to choose something it has in common with the DVR, usually Pelco-D is the lowest common denominator. Share this post Link to post Share on other sites
