cokestone 0 Posted August 24, 2016 Hi guys, I need to mount 12 dome IP cameras with a diameter of 135mm each. All walls are concrete so I need like a base so as to hide the cables ( ethernet, power, audio, etc). All bases I can find are slightly smaller, around 120mm. Any ideas? square junction boxes of 1000mm won´t look neat. I'm thinking in a rounded junction box of 70mm diameter and mounting the camera right next to it. PS: all the cables are run through tubes outside the walls. Cheers, Share this post Link to post Share on other sites
jazzar 0 Posted August 24, 2016 you could mount the camera directly onto a box like this if doesn't look out of place on site, any psu's / connections can be fitted inside box. see bottom of page on link for some alternatives. http://uk.rs-online.com/web/p/wall-boxes/1112351/ Share this post Link to post Share on other sites
cokestone 0 Posted August 25, 2016 you could mount the camera directly onto a box like this if doesn't look out of place on site, any psu's / connections can be fitted inside box.see bottom of page on link for some alternatives. http://uk.rs-online.com/web/p/wall-boxes/1112351/ Thanks Jazzar. The problem is that almost 20€ each and I have 12 cameras... I'll see If I can get a cheaper box. Share this post Link to post Share on other sites