CamTv 0 Posted September 5, 2016 I'm not so great with nvrs and recently I have had random cameras disconnect on me. After rebooting most would turn on but others would turn off. This problem only arose a couple weeks ago. I'm almost certain it's because I have my main-stream setting higher then the bandwidth will allow. Can someone help me figure out what bandwidth I need to set to equally get the BEST Main-Stream(Motion) quality on all 6 on my nvr cameras? I was able to find this table on the manual of my nvr but it does not tell me what bandwidth to set if I have 6 cameras. The model number of my nvr is LNR380 Share this post Link to post Share on other sites
