ktm76 0 Posted September 6, 2016 Hi, I own a DVR 8 Ch. Unknown brand but on the card it says "GM8187" In the network was not able to find a reset or firmware update. Attached are photos but the reason for the request I forced TCP and UDP ports to restart it went off power now hangs on the login screen and does not make me go further. Share this post Link to post Share on other sites
almelst 1 Posted September 7, 2016 Please explain "... forced TCP and UDP ports to restart ..." . Share this post Link to post Share on other sites
ktm76 0 Posted September 7, 2016 Thank you for having responded to me, as these operations of changing the settings of the DVR always do only this time I made from a networked workstation connected with the DVR and the amendment of the UTP ports; FTP; UDC; HTTP setting around 80 and I saved, but at time of writing has the power went out and now start the DVR loads the software, released the video screen with cameras for a few seconds and crashes. I unplugged the network I did various tests, but I can not, a few months ago I made backup extension * .cfg setting but I think I will have to flash the DVR and do not know how. Share this post Link to post Share on other sites
