gormley12 0 Posted September 11, 2016 Please read my earlier post subject ahd ptz problem on the 10th Share this post Link to post Share on other sites
tomcctv 190 Posted September 11, 2016 Please read my earlier post subject ahd ptz problem on the 10th hi im totally new and not very camera savy. i have cctv cameras already and they work fine, but i decided to had a ptz camera to it then was informed that it will only work on a ahd dvr so i have purchased one. now im all set no the camera will not work i check all wires their fine, so i put it all back together still no joy but i see the infa reds are on and its daylight. so i do checks and i plug the adaptor straight into the ptz camera and it moves on its own ive seen this before and i know its good so i just connect the bnc and ptz cable to the dvr and i have pictures so i know the camera works, so now i plug the adaptor which is a 12v back onto the 30 metre cable and again no movement just the infa red lights again so i unplug and check the adaptor power which reads 12.30 i connect the cable and check the end and the power is 12.30 so that works so why when i add the camera it all goes pete tong any ideas thanks hope what i said makes sense Hi can you give amp size of power supply also what cable size is the 30m To test it is a power problem use a 30m extension lead and put power closer to camera Share this post Link to post Share on other sites
gormley12 0 Posted September 11, 2016 All I know it's make is swan 3in 1 camera take 12volt 3 amp Share this post Link to post Share on other sites
gormley12 0 Posted September 11, 2016 Swam cable that is not camera Share this post Link to post Share on other sites
