Jump to content
Sign in to follow this  
flamik

Dome Camera Installation Help Needed

Recommended Posts

Hello,

 

We inherited a camera system that came with the house and one of the cameras died. It was SAMSUNG SCC-B9374N - It has been discontinued and I do not know if I can replace it with any camera or do I have to buy a certain kind. I bought a dome camera thinking it will be just plug and play into the system but the camera has 2 cords, one for COAX one for POwer but the wire that is sticking out of the house is a 4 pin connector. As you see I need help attached is the picture of the connection sticking out of the house.

Camera_IMG_5377.JPG.5d4265a76f364ef2c4499cf2f1a1d4ba.JPG

Share this post


Link to post
Share on other sites

Hi. That is the end that connects to the camera board.

 

You need the BNC end .... Either pull that cable out of the wall ... And you might see the BNC ( normally 6 to 12in) away from the connector in your picture

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×