flamik 0 Posted September 26, 2016 Hello, We inherited a camera system that came with the house and one of the cameras died. It was SAMSUNG SCC-B9374N - It has been discontinued and I do not know if I can replace it with any camera or do I have to buy a certain kind. I bought a dome camera thinking it will be just plug and play into the system but the camera has 2 cords, one for COAX one for POwer but the wire that is sticking out of the house is a 4 pin connector. As you see I need help attached is the picture of the connection sticking out of the house. Share this post Link to post Share on other sites
tomcctv 190 Posted September 26, 2016 Hi. That is the end that connects to the camera board. You need the BNC end .... Either pull that cable out of the wall ... And you might see the BNC ( normally 6 to 12in) away from the connector in your picture Share this post Link to post Share on other sites