Jump to content
rccctv

Dome camera mounting help

Recommended Posts

Need to install dome camera on a tv antenna pole. This is my very first installation.

I am thinking of an inverted shelf bracket and hose clamps. Any ideas would be greatly appreciated.

Please see image of bracket and camera:

261388180_DomeCamera.jpg.827f54d38ae1b9e6deb47174fce2a22c.jpg

2146327612_ShelfBracket.thumb.jpg.ea4e0989ca158477fc590fc42ead724c.jpg

Share this post


Link to post
Share on other sites

I would use some aluminum or stainless steal plate, thick enough and a little wider than the cameras back plate wall mount to mount the camera onto. Then use U Bolts the width of the pole to attach. Not knowing how the camera mounts you may have to have the U against the plate (rather than the nuts inside the back of the camera mount which would be unaccessible) and if you do you will have to space it out onto another plate layer where the U Bolt and plate connect to the pole and the camera plate is attached to the pole plate.

 

You will also need to consider where to have wire access into the mounting plate(s)

 

I have lots of other ideas but this is the simplest for me to explain today

Share this post


Link to post
Share on other sites

Thanks Lesst: That's a great idea and I may just do that. That sounds like the simplest and strong for South Florida thunderstorm winds.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×