JM170 0 Posted October 6, 2018 Hello Riogrande, I will try this version of the firmware to see if the problems are corrected. thank you very much, a greeting. Share this post Link to post Share on other sites
demci 0 Posted October 19, 2018 Hi there, I have just received my vto2000a. It came with 2018-06-20 V3.120.1026000.0.R installed, but I would like to move to SIP one. I have downloaded latest sip firmware (General_VTOXXX_Eng_P_16M_SIP_V3.300.0012000.0.R.20180627.zip) but I am unable to flash it using configtool 3.2 (4.09 does not even detect the device). Is my update procedure wrong?? I have added .bin extension to the file (as configtool filters file picker to only .bin files), opened upgrade tab, selected the file and tried to upgrade. After a few seconds it pops up "failed to upgrade" message. Once it managed to get to 50% or so.. One more thing - is the latest firmware fully capable of supporting rfid reader? Thanks, demci Share this post Link to post Share on other sites
riogrande75 3 Posted October 22, 2018 Didn't you unzip the .bin file from the archive? You must not just rename the whole archive from .zip to zip.bin! Share this post Link to post Share on other sites
fa355115 1 Posted October 30, 2018 Hello, is there a solution for the fact that I can't login the VTO2000 using config tool at port 3800 ? I have upgraded to the latest verion of the FW, and need to downgrade now but port 3800 doesn't seem to work to log in ?!? thanks !! Share this post Link to post Share on other sites
JM170 0 Posted November 7, 2018 Hello, I just updated my VTO2000A to SIP firmware V3.300.0012000.0.R.20180627, and it turns out that I changed the default password that was "Admin", now I can not enter. Please help. Share this post Link to post Share on other sites
riogrande75 3 Posted November 7, 2018 Then just factory reset it (press button on the back for 5 times) Share this post Link to post Share on other sites
JM170 0 Posted November 7, 2018 thank you, it has worked Share this post Link to post Share on other sites
JM170 0 Posted November 14, 2018 Hi RioGrande, I have managed to update the firmware of my VTO to the SIP version: "V3.300.0012000.0.R.20180627", I have observed several improvements, one of the main ones is that my problem with the 3CX System connection has disappeared. However I need to update the firmware with the messages in Spanish and customized, I have used the method proposed by Foxi352 in this same thread, however once I have the .bin created, I can not connect the VTO with port 3800 to update the firmware. Before upgrading to version "V3.300.0012000.0.R.20180627", it was possible to connect to port 3800, but after of the update it is no longer possible. regards Share this post Link to post Share on other sites
riogrande75 3 Posted November 14, 2018 Yes, there was a change in the upgrade process. But I do always upgrade via TFTP method, so don't ask me about it. Nevertheless, you will not secceed in installing a customized firware anymore. Since beginning of 2018 all FW files are signed, that means it is impossible to change it - only the manufacturere (dahua) can do this. So you got either install a older, even customized firmware via tftp or you got to live with that until dahua releases a firmware where you can replace the sounds officially via the web interface. Good luck, Rio Share this post Link to post Share on other sites
JM170 0 Posted November 14, 2018 there is some way to eliminate the audio messages from the VTO?, or to impersonate them by the messages that come in the 3CX system? Share this post Link to post Share on other sites
JM170 0 Posted November 14, 2018 Also, as I can return to the oldest firmware, if I can not update the firmware. Share this post Link to post Share on other sites
fa355115 1 Posted November 14, 2018 On the VTO there is indeed an option so that it doesn't "talk" anymore to the person who rings. Check in the interface ... Share this post Link to post Share on other sites
JM170 0 Posted November 14, 2018 Can you please tell me where the option is? Share this post Link to post Share on other sites
JM170 0 Posted November 14, 2018 will it not be "VTO Beep Volume" to 0? In that case, the messages are not heard, but neither is the conversation of who is answering the call. This would not help me. Share this post Link to post Share on other sites
fa355115 1 Posted November 14, 2018 it is a tab where you have 4 or 5 options ... one is called "talk manager" I think ... Share this post Link to post Share on other sites
JM170 0 Posted November 14, 2018 In that tab there are only 2 options: Auto Snapshot (on / off and default = off) Leave Message Upload (on / off and default = off) I've changed them to on and it does not change anything Share this post Link to post Share on other sites
JM170 0 Posted November 14, 2018 please, how can I go back to the previous firmware? Share this post Link to post Share on other sites
rickwookie 0 Posted November 16, 2018 Yes, there was a change in the upgrade process. But I do always upgrade via TFTP method, so don't ask me about it.Nevertheless, you will not secceed in installing a customized firware anymore. Since beginning of 2018 all FW files are signed, that means it is impossible to change it - only the manufacturere (dahua) can do this. So you got either install a older, even customized firmware via tftp or you got to live with that until dahua releases a firmware where you can replace the sounds officially via the web interface. Good luck, Rio Aagh! This is big news. Where did you find that info? I've been through this whole thread and just on the point where I am trying to modify the firmware to change the less-than-desirable "Calling Now" sound, only to discover that it will be impossible! Do you know what's the most recent SIP firmware that I can use that will allow this customisation, and where I can obtain it? Also, what features might I lose from the latest firmware by downgrading to this older version? Share this post Link to post Share on other sites
JM170 0 Posted November 17, 2018 Hello, I have seen out there, on the web, that there is a new SIP version of the VTO2000A, the 4.0, which allows you to modify audio messages with whatever you want. This is so? regards Share this post Link to post Share on other sites
riogrande75 3 Posted November 18, 2018 Yes, indeed there is a V4 SIP firmware out there: https://support.vidimost.com/comment.php?dlid=497 It includes the new webinterface 2.0, some minor changes. But it still lacks the feature to install your own sound files. I hope they are still working on this, users all over the world want that. Share this post Link to post Share on other sites
JM170 0 Posted November 18, 2018 Thanks riogrande. I have seen that at least the sound messages can be deactivated. Share this post Link to post Share on other sites
JM170 0 Posted November 18, 2018 Yes, indeed there is a V4 SIP firmware out there: https://support.vidimost.com/comment.php?dlid=497It includes the new webinterface 2.0, some minor changes. But it still lacks the feature to install your own sound files. I hope they are still working on this, users all over the world want that. Can the update of version 4.0 on the 3.0 be made through TFTP? or do we have to do it in another way? Share this post Link to post Share on other sites
riogrande75 3 Posted November 18, 2018 Use VDPconfig from toolbox to upgrade. Share this post Link to post Share on other sites
rickwookie 0 Posted November 22, 2018 Thanks riogrande. I have seen that at least the sound messages can be deactivated. Is that by using the new version 4.000 firmware? How do you update to that? When I try to load it using config tool, I just get the message "Failed to start upgrading". Share this post Link to post Share on other sites
rickwookie 0 Posted November 22, 2018 Use VDPconfig from toolbox to upgrade. Do I have to use this instead of configtool for it to work? If so, it's asking me to choose "Main Program" or "MCU Program", which is it? Share this post Link to post Share on other sites