SAJEEL 0 Posted October 21, 2016 Hi there, Need some help again, i have a pelco 5100 dvr setup need to have remote viewing on pc and (mobile as well if possible). The customer seems to think it can be done on mobile although i am not so sure. From what i have gathered there is 2 connection methods, secure using a vpn connection which is endura network, and un secure the stand alone method. I have the wan ip, ip of dvr and remote key for software, i also have putty to ssh but cannot connect. I believe the software uses port 27235 but am not 100% on this, dont have any idea of port used for SSH I want to connect using remote client and normally i open the relevant ports on router and forward to dvr, install remote client and done. However on this dvr there is no where to choose port numbers, i will be using a dns resolver as they have dyanmic wan ip address. I am sure someone on here has setup these before and is able to help, thanks in advance. Share this post Link to post Share on other sites
