oia 0 Posted October 31, 2016 This question seems simple, but I just couldn't get the monitor to display the image from camera. Basically, I'm trying to connect the camera with the 4.3" monitor I got the other day. The monitor should have displayed the image captured from the camera right away after I plug in the power, but for some reason it just couldn't display anything. I'm wondering if there is anything wrong with my setup. I mean, I followed everything on the camera's manual and I'm pretty sure that I got the power, ground and signal connected correctly. But, it just doesn't work the way I want it to be. Here the link to the similar setup on youtube: It actually works. How come mine doesn't? Can anyone please point me where I did wrong? Share this post Link to post Share on other sites
tomcctv 190 Posted October 31, 2016 This is your problem .... Your yellow to monitor should only go to centre pin of rca yellow plug ..... You then need a ground either from camera (black) or from your brake out box (ground) to the outer of your yellow rca Share this post Link to post Share on other sites
oia 0 Posted November 1, 2016 Thanks tomcctv! Everything works fine now. Share this post Link to post Share on other sites
