Zmodo network cameras with Escam NVR or similer?

[sonyvaio 0]

Hi,

 

I have a full zmodo camera security kit (ZP-NE14-S) but its suddenly stopped working, it stays on the Loading screen and I tried reset the NVR and even tried taken out the HDD but it still stays on the loading screen. I can still see the cameras on the Zviewer software on my pc but cant control the NVR box itself.

 

I was wondering if I could use the cameras (ZP-IBT15-S) on a new box like the EScam Super mini NVR or any other similer boxes recommended, the cameras are ONVIF compatable.

 

Any help would be grateful.

 

Thankyou.

[Chris_Lambourne 0]

This is due to the latest firmware update Zmodo decided we needed

 

Check the maintenance tab of the settings, get the firmware (software) version. You will then need to contact Zmodo for a previous version. Good luck with that. They are about as useful a glass hammer.

 

This may help too ...

 

bN8nV1WL5zY