mitbug2 0 Posted June 10, 2006 Hi all... Sorry if this is elementary...but I can't find anywhere (looking in config, cameras...) to change the resolution of the recording (version 8.0). I was looking at the older mannual of geo, it does show place in camera section to change the video resolution but that place not exist in the version 8.0... Please point me to the right direction... Thank you. Share this post Link to post Share on other sites
mitbug2 0 Posted June 11, 2006 Hi all... Thanks anyway...find answer to my own ?....for those interested....Choosing video source, go to 1. configure 2. video source 3. video standard (one used in your country) 4. video resolution... Share this post Link to post Share on other sites
ezCCTV 0 Posted June 12, 2006 Just to confirm: The setting under Video Source is the setting for the maximum video resolution. You then need to go to the individual camera settings under System Configure Click on the Configure Icon Click System Configure Select the Camera Tab Click on the Blue Arrow right of Recording Quality Select the desire resolution for that camera. Share this post Link to post Share on other sites
mitbug2 0 Posted June 13, 2006 Thanks ezCCTV... learn something everyday... Share this post Link to post Share on other sites
rory 0 Posted June 13, 2006 twas the same on the previous software Share this post Link to post Share on other sites
