ayjay2016 0 Posted November 21, 2016 I have this Xvim 4ch DVR installed into my house. It worked for 8 months without flaw. It was a really good deal and system. However, i one day noticed that the playback was not working and there was no recorded info in the system. I have a WD 2TB Purple HDD installed. I went to the HDD Management area, the system shows the HDD there, 0.0kb available and the same for used. When i press the Format it depresses the button on screen. nothing happens. I have reset the device, done everything. The HDD shows and works perfectly in my PC. I did return the HDD to the DVR no-formatted. Tried other known good HDD's. Still nothing. I did also notice the remote web view interface that at one point still did work does not work anymore. The site comes up, can navigate through like before. But instead of the video stream i get a black box with a smaller black box in the top left corner with a x in it. Is it the DVR Board? Because the system works like normal just for that one issue. Firmware maybe? Share this post Link to post Share on other sites
