Daveke 0 Posted December 7, 2016 Hi there since my current setup is getting outdated en has become very slow I'm investigating what pc setup would be best for a new installation. I am thinking about bying a new pc with an I7 processor with about 8 SATA disks. Or is it better to setup a performant pc and connect it to a SAN or NASbox like QNAP ? I looked for best practices for setting up a geovision system but wasn't able to find it. Can somebody give me some good advice on this ? thx Share this post Link to post Share on other sites
mattaggie 0 Posted December 8, 2016 I run 32 Geovision IP cameras using an i7 PC. I have 4 hard drives in it for video storage. This setup has worked perfectly for 4 years now. Minimum requirements: GV-VMS (Up to 32 Channels) GV-VMS Pro (Up to 64 Channels) CPU 4th Generation i3-4130 4th Generation i7-4770 Memory 8 GB RAM 16 GB RAM Note: To use the fisheye dewarping function, the graphic card must support DirectX 10.1 or above. http://www.geovision.com.tw/english/Prod_GVVMS.asp Share this post Link to post Share on other sites
Daveke 0 Posted December 9, 2016 Thx for your advice, it was helpfull. I now know what i have to buy. Share this post Link to post Share on other sites
