chrisimmanuel 0 Posted January 4, 2017 Hi Folks, I have an installation case that i need to solve, 1. i need to install 8 IP Camera HIKVISION 2. We need to have two NVR on a separate room 3. first NVR will only show channel 1-4 and the second NVR will only show 1-8 my question is, I want to use this scenario by using a separate POE switch (LINKSYS LGS116P - 8 POE port + 8 Gigabit Port) that send the data to two NVR's. So all cameras will go into the switch (POE port 1- and port 9 will go to the first NVR and port 10 will go to the second NVR. The NVR that i want to use is HIKVISION NVR DS-7604NI-E1 that only has 1 LAN port. I am kinda new in this IP CCTV. would that solution work ? I know i cant have only just 1 NVR because i need to separate the channel into 2 monitors. Warm Regards, Share this post Link to post Share on other sites
jeromephone 6 Posted January 4, 2017 Why not use one NVR and setup two accounts that would allow cameras one through 4 to be viewed by one user and another account that allowed viewing the others. That way you could use a client software on a pc for recorded viewing as well as live. Rights to be granted on NVR. Share this post Link to post Share on other sites
arnoldwei 0 Posted January 8, 2017 It is very simple, many NVR support dual monitors output. Share this post Link to post Share on other sites
Securame 0 Posted January 8, 2017 I want to use this scenario by using a separate POE switch (LINKSYS LGS116P - 8 POE port + 8 Gigabit Port) that send the data to two NVR's. So all cameras will go into the switch (POE port 1- and port 9 will go to the first NVR and port 10 will go to the second NVR. The NVR that i want to use is HIKVISION NVR DS-7604NI-E1 that only has 1 LAN port. That would work ok. Share this post Link to post Share on other sites