mfylc 0 Posted January 24, 2017 I have a BNC wire coming out of my DVR and I want to connect it to my in-the-wall screen. Input from the screen is either AV, VGA or HDMI. I tried to use a converter (BNC to HDMI) but the screen blinks frequently or turns the images upside down or cuts the bottom half of the images and shows it higher up than the top half. Bnc/rca adapter dint work as well Does anyone know how I can convert the wire so that it should work with my screen? Any advice would be appreciated. Share this post Link to post Share on other sites
jeromephone 6 Posted January 26, 2017 Do you have a VGA out on your DVR. Most TVs allow for a VGA input. IF you only have one output on your dvr you may need to use a vga splitter or hdmi splitter, depending on you dvr's video outputs Share this post Link to post Share on other sites
mfylc 0 Posted January 26, 2017 I have all the inputs on the Dvr the problem is that the wires running to the screen in the walls are bnc, I have no way to pull new wires to the screen Share this post Link to post Share on other sites
wilkcards 0 Posted January 28, 2017 BNC to RCA adapter Share this post Link to post Share on other sites
jeromephone 6 Posted January 29, 2017 Check to see if the tv has basband input usually a yellow rca. try using that input with the proper plugs etc. Share this post Link to post Share on other sites
