Cameras Worked Fine, Now I See Nothing But A Blank Screen?

[Arran 0]

Hello all, any help with this would be greatly appreciated as Ive seriously ran out of ideas!

 

I bought a Floureon Security Camera System with 4 cameras and placed them around my shop, it all worked fine for months and I was able to use the CMS that came with it to view video recordings etc etc.

 

Then out of the blue, all my cameras stopped working at the same time, I still get the date stamp in the top corner and the time counter running in the bottom corner, but nothing else, just a black screen. Ive checked all the wires, tried various other things...but nothing!

 

Any ideas?

[the toss 0]

The time/date stamps are generated within the DVR. Your most likely problem is loss of camera power especially if they are all fed from a single supply.

[Arran 0]

The time/date stamps are generated within the DVR. Your most likely problem is loss of camera power especially if they are all fed from a single supply.

 

All four cameras connect to the Floureon box, the box is on, so I dont see how they can have no power?

[karenbigbro2 0]

Check the power supply to the cameras, if all cameras have gone off - the power supply may have failed.