nenea dani 0 Posted February 16, 2017 Please help me with a flash bin for Dahua DVR5104 equipped with HI3520 and MX25L12845EMT. It was on the Internet when it was damaged and no longer boot probably due hackers. I will insert the firmware directly into memory MX2L128 with a programmer RT809F. I've done this for models with 16 and 32 channels, but for 4 channels I do not have flash bin. Any advice is welcome. Share this post Link to post Share on other sites
parrin 0 Posted April 15, 2017 onurcrzy said: pm flash.bin Greetings, if you can provide me the flash.bin file for DVR5104 Dahua. Thank you. Share this post Link to post Share on other sites
parrin 0 Posted April 15, 2017 nenea dani said: Please help me with a flash bin for Dahua DVR5104 equipped with HI3520 and MX25L12845EMT. It was on the Internet when it was damaged and no longer boot probably due hackers. I will insert the firmware directly into memory MX2L128 with a programmer RT809F. I've done this for models with 16 and 32 channels, but for 4 channels I do not have flash bin. Any advice is welcome. Regards Dani, grateful if you can help me. I have two DVR3116H with the same fault you describe and I tried to insert the firmware directly into memory without achieving results. Do I have to copy only the flash.bin file to memory? Since the firmware that I have for this DVR has no such file. What is the procedure? I greatly appreciate your help. Share this post Link to post Share on other sites
nenea dani 0 Posted April 16, 2017 I copied a memory from a functional device with a programmer. What kind of memory content do you have? Up-date or something else? Share this post Link to post Share on other sites
parrin 0 Posted April 17, 2017 nenea dani said: I copied a memory from a functional device with a programmer. What kind of memory content do you have? Up-date or something else? Thanks for replying, so you explain copied with a programmer a memory of a functional device. In my case the memories are corrupt. My question is if you can copy the memory directly with the files: general, flahs.bin, or update. Since I have tested with all the files and the equipment has the same failure. In theory I thought it would be like rewriting the files since they are all compressed in the package. I do not know if it is due to something related to decompression or you have to edit some file. Unfortunately the failure blocks the network port and Serial RS232 port and I have no other way to reinstall the firmware. I appreciate any comments. Share this post Link to post Share on other sites
nenea dani 0 Posted April 18, 2017 Please wait 1-2 days to talk accountability IT due to holidays. Share this post Link to post Share on other sites
saandu 0 Posted April 30, 2017 Hello! I also have Dahua DVR5104 equipped with HI3520 and MX25L12845EMT, same problem. can you help me? Share this post Link to post Share on other sites
