Hikvision DS-2CE56D1t-AVPIR3 video loss Problem

[m300raj 0]

Hi all i have a strange problem with this newly installed camera all was fine i thought but as soon as night fell and iR is activated video scrambled for a few seconds the no video until morning when ir deactivated, so i thought it was the camera and i swapped it over for a new one and had the same fault it is currently attached to a Hikvision DS-7208HGHI-SH

any help would be appreciated.

[Securame 0]

Check the power for your camera, it probably is not enough for the camera to work at night with the infrarred on.

[m300raj 0]

I have swapped power supply just incase with a dedicated 12v 1amp psu and that had no effect.

I assume 12v is enough 1amp should be as max consumption is 4w.

[m300raj 0]

I have swapped power supply just incase with a dedicated 12v 1amp psu and that had no effect.

I assume 12v is enough 1amp should be as max consumption is 4w.

I have now put in a 2 amp psu as i think the cheap Chinese one may be under powering the camera as several people have said its the power supply i will update my findings tomorrow.

thanks

[m300raj 0]

Well same thing happened this evening so am left scratching my head.

Any ideas anyone?

[m300raj 0]

Just to let everyone know i have now sorted this problem.

thanks

[as786 0]

How did you resolve it?

[sohail.master 0]

How was it resolved, I am having the exact same problem on my newly installed cameras, any help will be much appreciated

[Dean1705 0]

On 3/8/2017 at 10:47 AM, m300raj said:

Just to let everyone know i have now sorted this problem.

thanks

Hi how did you sort this problem