jesscastro 0 Posted March 15, 2017 good day, need help here..I have 6 AHD cam on my client...the problem are at daytime they work fine but at nightfall it turn black but they have IR....im using utp cat5e cable..tnx Share this post Link to post Share on other sites
guitaristshobi 0 Posted March 28, 2017 Most probably amp dropping issue !!! What is the distance from power supply to per camera? Share this post Link to post Share on other sites
jesscastro 0 Posted April 3, 2017 Most probably amp dropping issue !!! What is the distance from power supply to per camera? good day ..thanks for response to my problem...my power is near at the cam..70mtrs. distance Share this post Link to post Share on other sites
bklynsoulja 0 Posted April 7, 2017 Most probably amp dropping issue !!! What is the distance from power supply to per camera? good day ..thanks for response to my problem...my power is near at the cam..70mtrs. distance I had this problem before, best way to find out is get a power source close up to your camera that having issue and check if night vision works ( you can dismount the camera and take it inside to make sure it is not your camera). If it is working, you got amperage drop from your line. 70 meters is pretty long depending on the gauge wire you use for power. Especially if you are using IR ARRAY leds. Share this post Link to post Share on other sites
