MaCJaX 0 Posted April 8, 2017 Hey all !! First post here !!! Looking for some help, I have a GV-1480 and GV-NVR 8.7.0 software installed. I am only able to see cameras 1 to 8 and not 9 to 16. I do not have the video loss message on cameras 9 to 16 but the GeoVision's logo so it seems as they are disabled. Do you know how to enable cameras 9 to 16 ? I know my dongle and camera feeds are good as this setup worked with my GV-800 card. I looked everywhere for these settings and I did find a location with check marks where you can enable/disable them and cameras 1 to 16 were enabled however, cameras 9 to 16 were greyed out. Pease help and thank you !! Share this post Link to post Share on other sites
mattaggie 0 Posted April 15, 2017 one of the best things about Geovision, is there support. Call or email them and they will help you out http://www.usavisionsys.com/?page_id=120 Share this post Link to post Share on other sites
