vfd030 0 Posted April 11, 2017 Setting up an S15D FlexMount with two D12 cameras. I am a little confused to some of the set up and unable to view live picture on computer. First time ever setting up a system like this. I have my Wireless router (IP: 192.xxx) set up and is broadcasting a strong internet signal. I have the S15 connected to a POE Injector, which is then connected to the LAN port on my router. My Sensor Cameras are hooked up to the S15. Currently the S15 is Blinking RED and GREEN lights TOGETHER, approx. once per second. My sensors both have a steady green light on them. I have a MacBook that I have used to configure my Wifi network and didn't have any issues. However I was reading the install manual and see that it says you have to make your ethernet port 10.20.xx.xxx to match the cameras IP. Not quite sure how to do this on a Macbook? I was planning on viewing these cameras all from an iPad with the Mobotix App. Can MxManagement be used on a MacBook? I have done the setup manually and haven't changed any settings. Wondering why I cannot see a live image. Share this post Link to post Share on other sites
