Any weather proof rj45 connector that works with Axis E cams

[avraam 0]

... and are around $25?

 

I saw on ebay lots of axis originals, but they are way too expensive. Any cheap(er) ones available that work just as well?

 

Thanks!

[CalgaryGuy 0]

... and are around $25?

 

I saw on ebay lots of axis originals, but they are way too expensive. Any cheap(er) ones available that work just as well?

 

Thanks!

 

I am in the same boat -- looking for waterproof ones but I only need for one cam. They are pricey. I've used indoor ones in the past and then sealed them with UV heat shrink tubing. Works like a charm, unless you need to regularly disconnect them. Even then, I have lots of indoor ones so it is just easier to cut off the tubing and reconnect when done.

 

Just my 2 cents worth

[tomcctv 190]

Hi. Make your own from pvc conduit and cable gland ends

[kayakhead 0]

I found some on the AliExpress Site...China. https://www.aliexpress.com/snapshot/0.html?orderId=84102944521734&productId=32806795384. It will fit over the RJ45 connector without cutting the cable.

Also:https://www.aliexpress.com/snapshot/0.html?orderId=84102944511734&productId=32777406863

This one is a pigtail. The product is called a RJ45 PoE Injector Female DC12V Input Connector Plug Power Over Ethernet Outdoor Waterproof Adapter Cable for Network IP Camera.

I have not received it yet, but should work fine.

[tomcctv 190]

I found some on the AliExpress Site..

 

Hi. None of what you have listed are any good.

 

You don't get the camera end ....... so will not fit other camera manufacturers

[kayakhead 0]

You are wrong. This one has both male and female.

https://www.aliexpress.com/snapshot/0.html?orderId=84102944511734&productId=32777406863

[tomcctv 190]

You are wrong. This one has both male and female.

https://www.aliexpress.com/snapshot/0.html?orderId=84102944511734&productId=32777406863

 

 

No. Not wrong .

 

The black kit ......take a look at it .....it is pointless and none Poe for axis......... But besides that why would you waterproof the rj45 and not the power plug........ Then a couple of inches away you have another rj45 there is nothing in the kit to waterproof that .....pointless. For axis

 

I have not received it yet, but should work fine.

 

Not used one yet ........ But say am wrong