kmarnold 0 Posted April 22, 2017 I recently installed a new home security system and, because of limited attic access in one section of the house, I need to run a few cables along the exterior of the home. Can anyone recommend a good way to protect and conceal those wires? I'm able to drill and screw into the siding, but would prefer to limit or avoid that, if possible. Thank you! Share this post Link to post Share on other sites
jimmyv2017 0 Posted April 22, 2017 Are you able to tuck the wires under the siding or the j channel?? I did that for 1 of my cams. Share this post Link to post Share on other sites
kmarnold 0 Posted April 23, 2017 No, unfortunately. I'm guessing it's some kind of cement board. Except for a little texture, it's a smooth surface - no overlapping boards like traditional siding. Share this post Link to post Share on other sites
tomcctv 190 Posted April 23, 2017 Hi. How many cameras are you looking to install at that location ? You might find if looking at 4 or less at that location cat5 is your best option as you can run upto 4 camera down 1 cable making it easier and tidier Share this post Link to post Share on other sites
