new camera problem

[montyfert 0]

hi i have an annke dvr

i have

1 1080p cvi camera by the front door 25fps

1 960p camera by the back door 25fps

1 960p camera on the car25fps

i replaced the one on the car with a 1080p cvi sony starvis camera and now the fps on the front door cvi camera has dropped to 7fps and wont go higher than 7fps,

silly thing.

if i remove the new 1080p cvi camera i can change front door camera to 25fps , but not with the new camera conected.

hope someone can help as i am pulling my hair out and annke are useless .

 

here is a link to my dvr .

http://www.annke.com/annke-4ch-1080p-ahd-security-system-dg41nc.html

[tomcctv 190]

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

[montyfert 0]

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

 

 

tried that it didn't make a difference,

[tomcctv 190]

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

 

 

tried that it didn't make a difference,

 

Hi set both to 7

 

Also take into account playback on that dvr is only 10fps

[montyfert 0]

Hi. You need to set both cameras to 15fps ..... they will not run at 30.

10fps is best for that dvr

 

 

tried that it didn't make a difference,

 

Hi set both to 7

 

Also take into account playback on that dvr is only 10fps

 

it should record at 1080p 15fps . or 180n 30fps

the other 2 cameras are recording at 25fps