joshandlisa 0 Posted May 15, 2017 [/b][/b]Wondering if I could please have some help!!! After I have installed and set up eyerything, I open the avermedia software. Every camera view is showing a green screen. The cameras are still detecting motion but not showing the view. Here are all the specs I have. I have also updated all drivers for everything and have the latest versions of the software installed aswell. Running: windows 7 enterprise 64 bit Gigabyte motherboard: GA-B250M - HD3 Chipset for motherboard: intel B250 CPU chipset: LGA1151 2 x mv6480exp cards ( holding 16 cameras) Avermedia nv6000 software version, 7.9.0.038 8gb ram (dim4) HDD: 5000gb (on 5 seperate hdd) Graphics card: GFORCE 9500GT with 4gb ram All analogue cameras CD-RM / DVD-RM ON BOARD ETHERNET ON BOARD SOUND CARD I have tried installing and uninstalling things, everything that I think it can be. Any advice or help would be really appreciated as I am at my wits end with this!!! Thanks in advance Josh Share this post Link to post Share on other sites
mateck8888 0 Posted May 17, 2017 Possibly a bad card. I have an NV6480 that had really fuzzy scrambled multi color windows for all analog cameras, but perfect video for IP cameras. Perhaps you should try an IP camera and see if it works with that. Or better yet, swap out the NV6000 card if you have another one and see if it is a hardware issue. Share this post Link to post Share on other sites
