zaq123 0 Posted June 4, 2017 I have a HIKVISION Video Access Control DS-KV8102-IM. Its is POE powered and pretty easy to setup with the screen also POE but i am having an issue connecting to my door strikes I have two doors one inside the other which i want both to open at once. The output on the hikvision door station is dc power . my door strikes (they came with the door) one is ac power and one is dc. I m not an access control expert have installed systems but straight forward ones. any help would be appreciated Share this post Link to post Share on other sites
ssmith10pn 0 Posted June 4, 2017 Have the Hik fire a Altronix RBSN relay and connect a strike to each side of the relay with their own independent power. http://www.altronix.com/products/rbsn Share this post Link to post Share on other sites
zaq123 0 Posted June 5, 2017 i am a little confused on the layout . i should run from the common on the hik to the common on both sides of the relay and then what? do i need two powersupplies? ac and dc? Share this post Link to post Share on other sites
