shehan31 0 Posted June 22, 2017 I have installed the above system with 2MP cameras. The live view seems good. I have set the recording resolution to a lover value of each camera after a calculation for a certain period. live view remains good for little amount of time and the resolution of each camera changes automatically according to the NVR's recording resolution. Is there any way to have a better resolution for live view while keeping the recording resolution to its lowest values. Share this post Link to post Share on other sites
almelst 1 Posted June 25, 2017 Live view resolution is practically the one set for normal recording. You can only try to set recording in substream resolution. BTW , I see no point in using 2MP cameras and using them in resolution. If you want to extend recording period, rather set lower frame rate and recording quality or use H264+ compression. Share this post Link to post Share on other sites
shehan31 0 Posted June 26, 2017 Live view resolution is practically the one set for normal recording. You can only try to set recording in substream resolution.BTW , I see no point in using 2MP cameras and using them in resolution. If you want to extend recording period, rather set lower frame rate and recording quality or use H264+ compression. Thank you for your reply. In this model i did not find a method to record with sub stream. Even though the sub stream can go up to maximum 4CIF and I have to configure for 720p as recording resolution. Share this post Link to post Share on other sites
