steviej1974 0 Posted July 4, 2017 Model NVR 7608 ni se Steps: - I am on a static Ip and nvr is on LAN static ip - turned on UpNp so port forwarding is auto configured as it was before the firmware upgrade - admin user usually had remote access , now I receive "no permission" both ivms 4500 and hik-connect. - added a second user and gave permission for everything, still getting the same error. Also added the MAC address of my iphone and still getting the same error. - i can sign in on nvr and monitor with the same "admin " and password. Any ideas what is causing this , as I do not want ro roll back the firmware upgrade. Share this post Link to post Share on other sites
Shaban Ali 0 Posted August 13, 2022 Yes! I have got the solution of this problem... Its solution is check your username and password. You must confirm this there is no space at the end of username or password. After try this you are facing again you send email to me. Thanks shaban6833831@gmail.com Share this post Link to post Share on other sites
