gmac21 0 Posted July 7, 2017 Hi all, Im a new member to this forum hoping to find a little help with my problem. I have had Swann cameras (NVR4-7000) installed at my home for a little over 2 years now (purchased from Costco) The other day there was a popping sound from the NVR unit and the power went out. After going outside to the meter box to flick the safety switch back on everything returned to normal apart from the cameras - dead as a door nail! I contacted Swann but because they are no longer under warranty they wanted me to send it off to Melbourne and it all started sounding a bit ridiculous Hopefully there is an easier fix providing the damage isn't too extensive... Would appreciate any thoughts or help? Cheers, Glenn Share this post Link to post Share on other sites
GadgetAssistant 0 Posted July 8, 2017 Hello. Try a new power adapter, hopefully it was not the NVR. Share this post Link to post Share on other sites
gmac21 0 Posted July 8, 2017 There is no power adapter, just the power cord Share this post Link to post Share on other sites
