Camera access

[shihabtir 0]

Dear All,

Hope you all are doing well, i am totally newbie to cctv and nvr devices.i have general queries to all of you hope i will get solution from here.

we have 2 buildings with 20 camera,the first building with 14 camera are directly connected to extreme network switch with vlan and assigned 192.168.168.x and 2nd building with 6 camera are connected on network switch with NVR and assigned same ip range.now we want to access all these camera from our network 172.17.X.X .so the questions are

1.how can i access these camera from our network(its not pinging from 172.17.x.x)

2.if need to do port forwarding ,how can i make it in network switch

3.As i described,14 camera are directly connected switch without any nvr,so where the recording is saving.

 

Thanks in Advance

[TheF 0]

Are the two switches in the two buildings connected?

 

Then, if set up properly and if NVR supports that many cameras, the recordings from all cameras should be saved to the same NVR.

 

As for port forwarding, you don't set that in the switch.

You set that in the router that connects your LAN to the internet.

Then, when outside the network, you access your routers external IP adress.