pepe11barth 0 Posted July 22, 2017 Hi All can anyone help me? I've purchased DVR the problem I've got is the setting up, I've gone and tried to set the menu via vga cable to my laptop silly me. Now I find out from a friend it cant be done that way because vga on the laptop is out only. So I've tried HDMI cable on TV monitor but nothing happens, is it possible the DVR is now damaged.thanks Share this post Link to post Share on other sites
usdan 0 Posted July 22, 2017 Did you try to attach a monitor (a screen for a pc) to the DVR ? Share this post Link to post Share on other sites
pepe11barth 0 Posted July 23, 2017 Hi yes I've tried using a monitor later but no interface. nothing at all showing, by using vga cable in first instance I'm thinking I may have damaged it .Thanks Share this post Link to post Share on other sites
cctvnerd 0 Posted July 28, 2017 If you have an manual about the dvr, please read the instructions. sometime you must activate the hdmi port in the interface. maybe you try to reset the dvr to factory defaults. Normally there should be a button on back of the back of the dvr. but the procedure how to reset differs from dvr to dvr. maybe just hold is it for some seconds and look on the monitor what happens. normally you cant destroy the vga interface that way... Share this post Link to post Share on other sites
