Android App IVMS 4500 Remote View Problem

[MrMan365 0]

Hi everyone.

Newbie here.

I have a Hikvision setup at home. I can remote just fine to the NVR both while in the local Lan using the local ip as well as externally using my ISPs external IP. I can see all the cameras just fine, change settings etc.

 

However, I cant seem to configure IVMS 4500 on my android phone to view all the cameras outside of my local Lan. When adding my NVR to the devices I can view all cameras just fine when in the Lan but when i disable wifi to test connection over 4g, it only shows 1 camera (one of 3 that is connected to my NVR over wifi to my router) as visible and not the usual 6.

 

Setup

I have 3 cameras connected to the NVR over wifi via my router

1 connected to the NVR via an ethernet cable via my router

The other 2 connected directly to the NVR via ehternet ofcourse.

 

Can anyone advise? Maybe im configuring IVMS 4500 incorrectly...

Thanks

Thanks

[MrMan365 0]

Bloody hell.. Sorted it. After weeks of not being able to, after posting my question i decided to look in the network config of the camera it was defaulting to, Camera 1.

Connecting to the camera itself via its internal ip address, I noticed the external ports on the NAT configuration page under Network, Basic Settings were the same ports as the NVRs. Port 8000 to be exact.

I changed this to something else.

Problem solved.

 

Can my thread be deleted or archived? lol.