voyager 0 Posted October 3, 2017 About 2 to 3 years ago I purchased a Q-See 8 channel DVR system with 4 720p analog cameras. I've since acquired 2 more of the same cameras. Only 3 of the cameras have been installed yet. I have not completed the installation because I am not very happy with the way the system functions. The software is slow, clunky and not very intuitive or efficient to use. I have a fairly good functional PC that I replaced because I wanted to upgrade to a UEFI BIOS, SATA III HDDs, SSDs and other performance enhancing options that it didn't have. It is still a good quad core system with a smaller SSD and SATA II HDDs. I would like to see if there is a better surveillance software [preferably freeware] than Q-See's that could be installed on the DVR that came with the Q-See system, or onto my extra PC that could make this analog system function much better. Any thoughts, ideas, or suggestions on the viability of accomplishing this? Share this post Link to post Share on other sites
damien3320 0 Posted December 8, 2017 Hi voyager, I'm having the same situation, i'm trying to replace Dahua, VD tech, Vantech original software and combine them into 1 software but still no luck. Have you found the solution yet ? Share this post Link to post Share on other sites
