cupidstoejam 0 Posted October 21, 2017 Hello forum, I have nine cameras set up. All cameras are working. My issue: Camera's eight and nine are not controllable unless i have another camera selected with controller. In other words, while using controller; cam 1 controls cam 1 and 8 (both cameras move) cam 2 controls cam 2 cam 3 controls cam 3 cam 4 controls cam 4 cam 5 controls cam 5 cam 6 controls cam 6 and 9 (both cameras move) cam 7 controls cam 7 cam 8 controls none cam 9 controls none Anyone have feedback on what is causing this behavior? Share this post Link to post Share on other sites
msecure 0 Posted October 22, 2017 Do you mean all nine are Pan Tilt Camera that moves? Share this post Link to post Share on other sites
cupidstoejam 0 Posted October 23, 2017 Yes, all nine are PTZ's Share this post Link to post Share on other sites
msecure 0 Posted October 24, 2017 Yes, all nine are PTZ's Are you sure the ID is not duplicated? Check Cam 8 & 9 to see if you have set the ID wrongly. Share this post Link to post Share on other sites
cupidstoejam 0 Posted October 24, 2017 ID? All i see are the camera names which are all unique Share this post Link to post Share on other sites
msecure 0 Posted October 25, 2017 ID? All i see are the camera names which are all unique You need to set the ID via the camera OSD. BTW, are you using a pair of rs485 for controlling the ptz or UTC? UTC=Up the Coax, for controlling PTZ without needing additional cable. Is it SD or HD camera? Share this post Link to post Share on other sites
cupidstoejam 0 Posted October 25, 2017 Coax SD cameras Share this post Link to post Share on other sites
msecure 0 Posted October 25, 2017 Coax SD cameras There should be physical dip switch for you to set the camera ID. Share this post Link to post Share on other sites
cupidstoejam 0 Posted October 25, 2017 Thank you very much for your help!! Share this post Link to post Share on other sites