Intellex 4.0 Help.

[cupidstoejam 0]

Hello forum,

I have nine cameras set up. All cameras are working. My issue:

Camera's eight and nine are not controllable unless i have another camera selected with controller. In other words, while using controller;

 

cam 1 controls cam 1 and 8 (both cameras move)

cam 2 controls cam 2

cam 3 controls cam 3

cam 4 controls cam 4

cam 5 controls cam 5

cam 6 controls cam 6 and 9 (both cameras move)

cam 7 controls cam 7

cam 8 controls none

cam 9 controls none

 

Anyone have feedback on what is causing this behavior?

[msecure 0]

Do you mean all nine are Pan Tilt Camera that moves?

[cupidstoejam 0]

Yes, all nine are PTZ's

[msecure 0]

  cupidstoejam said:

Yes, all nine are PTZ's

Are you sure the ID is not duplicated? Check Cam 8 & 9 to see if you have set the ID wrongly.

[cupidstoejam 0]

ID? All i see are the camera names which are all unique

[msecure 0]

  cupidstoejam said:

ID? All i see are the camera names which are all unique

You need to set the ID via the camera OSD. BTW, are you using a pair of rs485 for controlling the ptz or UTC? UTC=Up the Coax, for controlling PTZ without needing additional cable. Is it SD or HD camera?

[cupidstoejam 0]

Coax SD cameras

[msecure 0]

  cupidstoejam said:

Coax SD cameras

There should be physical dip switch for you to set the camera ID.

[cupidstoejam 0]

Thank you very much for your help!!

[msecure 0]

You are welcome!