higguns 0 Posted November 10, 2017 Hello, I have a Hikvision NVR and have set it up for remote viewing via the android and apple apps. I have set these up a few times before (some for clients and some for friends). Basically the NVR is connected to the Bell Fibe Hub/Router and it can be viewed from a wired connection on PC from within the network, on a android or apple device from the app via an outside connection WIFI or cellular data, but for some strange reason it won't allow me to connect via WIFI on the same network as the NVR. It comes up and says connection error. Anyone know what would cause this? I am thinking the Bell Fibe hub/router is likely the culprit, but don't know what setting would prevent the internal connection to the NVR from WIFI. Thoughts? Share this post Link to post Share on other sites
51cent 8 Posted November 10, 2017 It could be that your router is blocking loopback connections. https://forums.att.com/t5/AT-T-Fiber-Equipment/NAT-Loopback-on-5268AC/td-p/4766860 Share this post Link to post Share on other sites
rasanti 0 Posted November 21, 2017 Are You using the same ip address as your local network or do you have a alias like a DNS??? Share this post Link to post Share on other sites
