La Cocinita 0 Posted November 25, 2017 We bought a 'legacy' system of eBay consisting of 4 EHD500IR cameras plus an ECOR264-D2 DVR. Everything arrived in one piece, and I've installed my first camera, the DVR and monitor. Everything seems to function correctly, except I cannot get the camera image to show the 'live view' on the monitor. Cupping my hand over the dome turns the IR lights on, so I know it's getting power. At the DVR end, if I unplug the 24v power connection, I get a very brief image from the camera, but then it's back to the green screen. When I was testing the four cameras on the ground in the office, one of them worked - providing a continuous picture, but after unplugging everything, I can't remember which one it was. I've wandered all over the menu and can't figure it out how to display the 'live view'. Any help is appreciated! THANKS! Share this post Link to post Share on other sites
tomcctv 190 Posted November 25, 2017 At the DVR end, if I unplug the 24v power Hi. DVR is 12v ....... the 24v is for your cameras as they are duel power. Share this post Link to post Share on other sites
