Wireless HDMI and other things

[Mit3l 0]

Hello there,

 

I have finally purchased some CCTV system for my house. Brand of DVR is HIKVISION.

 

Now, I plan on installing this 8 Chanel DVR on the third floor, and connect it to the Internet for access on my mobile device (all of that still to be done).

 

I don’t actually know what app I have to use and if that can be used on the lapatop too?

 

As I have no router in that floor (for Ethernet), I will be adding an extender router, which will allow me to connect the DVR to the net.

 

Now, is there a way for me to see this on my Samsung SmartTV screen on the ground floor? I.e in your experiences, via either an app or similar? Running a HDMI cable all the way down from third floor to ground floor is not possible.

 

The only thing I can think of is a wireless HDMI sender/receiver, but they can be somewhat costly – decent kits at around the £200 mark.

 

The only thing I plan on doing with this, switching back and forth every now and then to the CCTV while watching something.

 

Finally, I was told by a friend his CCTV system automatically flickers his TV channel to that of his CCTV if motion is detected. Is this something we can do with Hikvsion?

 

Thank you, in advance.

[tube tech 1]

you can see the NVR over IP. I feed the composite video to Channelplus 5545 modulators to make all NVRs visible on all TVs. I bought the CCTV system from an apartment building off of eBay, learned a whole new skill set.

[Boogieman 1]

you can see the NVR over IP. I feed the composite video to Channelplus 5545 modulators to make all NVRs visible on all TVs. I bought the CCTV system from an apartment building off of eBay, learned a whole new skill set.

God you dont have a clue...you need to stop giving bad advice.