cladvx 0 Posted January 11, 2018 Hi I have buy a TP-link switch SG1008P poe, and access point Tp-link EAP110 passive. But both not work if I connect on port POE . I need of a injector or splitter or what I need for use this together ? Share this post Link to post Share on other sites
hnptekronik 0 Posted January 16, 2018 You should be able to power up EAP110 with your POE Switch. Please make sure you plug in the UTP cable in the correct port, since SG1008P only have 4 POE port. You may also want to try different cables just in case you have faulty cable. Share this post Link to post Share on other sites